Dry Soils and Nitrogen Application. What should I do?
Welcome back to JJ in the field, I’m your host, Jonah Johnson. So, we are dealing with dry conditions. Water is evaporating from our soils; corn is at sidedress, top dress height right now. Growers are trying to continue to work in the fields, obviously. Today’s question revolves around, should I keep adding nitrogen to the soil, considering how dry is?
We all know we need moisture for mass flow from the nitrogen source to get the solution to move into those root zones so that plants can uptake that. If you look at the field behind me, obviously it’s a very dry situation. Dry soils planted around May 20th had very little rain and the corn has kept growing and emerged and has been growing surprisingly fast, which is telling me, and perhaps in your own situation, that the corn’s found moisture enough for it to grow.
Considering that there is moisture below our feet currently right now, if you dig down you will find some moisture. And if we’re side dressing or top dressing, our nitrogen application right now, that’s something we need to really consider. What does it cost you if you shut down right now and then apply any more nitrogen?
If we break this down, there are two camps. Are you injecting below ground or are you applying on top ground? So, if we first talk about, we’re putting nitrogen, whether it’s a UAN solution or anhydrous ammonia in the soil, think about if you are injecting right now that you’re getting below the ground, probably anywhere from 3 to 6 inches.
And chances are the deeper you go, the more moisture we’re going to find that will begin to go into a solution with the soil moisture that is there. So obviously, the UAN is a solution already and it gets diluted and goes into a mass flow situation, once it gets moisture, that will become available to our plants once those roots get to that band.
If you’re a Y-dropper right now, some guys I work with either Y-drop when the plants are younger, they may wait on the corn, get some height to it and go and Y-drop or there’s some application coming out there that has the ability to inject in the center and Y-drop at the same time or vice versa.
Consider again UAN is a solution and that will go in those plants because if you think about it, you’re putting that band right on top of the root zone and that linear cornrow, and that will get into the plant initially because its placement is so much closer via band. I encourage you to keep trucking, if you will, right now with our nitrogen application, because as we have moisture, obviously if we don’t get a rain, that moisture is going to start to diminish.
And if we can get that nitrogen in solution, it won’t go anywhere because the nitrosomonas, nitrobacter bacteria in the soil. They’re going to be dry too. And they won’t be as active as breaking down those nitrogen sources. The urea and the ammonium component of in the UAN is going to be quite stable on its own.
And then the nitrate fraction, which is going to be really up-takeable, those are all about to go in the solution and be available to that plant quickly. But we’re not going to lose those because we’re not in a situation where we get into a denitrification or ponding type situation that would encourage leaching. So, keep that in mind.
Anhydrous ammonia, that’s going to be a stable source regardless as it goes in the soil. Obviously, we’d like to see a little bit of moisture to seal that application slot, but again, you’re injecting that quite deep, typically seven or eight inches unless you’re using a high-speed toolbar. In those deeper situations, again, we will find moisture enough to seal that and retain that nitrogen around for those plants.
So ultimately the situations that I’m listing, what we don’t want to happen is that corn plants start to bolt and then either we can’t get back in once rains do return if we get into a very wet situation because, obviously, that that’s a bad day. If we can’t supply nitrogen in a timely order. The other side of the fraction is guys that typically top dress their corn.
Whether you’re using a urea or AMS type product, ammonium sulfate is going to be a very stable product on its own. The sulfur proponent in that fertilizer essentially gives you a time delayed release. The sulfur has to be oxidized in the soil for that sulfur and ammonium to be released or the sulfur protects the ammonium of the nitrogen proponent.
I don’t have concerns about that on the refraction, whether you’re using the blend or urea by itself. I do encourage you to use a NBPT stabilizer on your application because as you can see, hot, sunny days, intense sunlight, lots of U.V. light, it’s going to be penetrating and warming the soil surface that will break those urea pearls down very quickly.
Then there’s been a questions asked about, well, what about the urea enzyme, which is a naturally occurring enzyme on the in the soil and in biomass that initially starts to break urea down? Does that need a lot of moisture for that that process to begin? And the answer is, it does need moisture. But my concern is, the bright sunshine and the winds is going to start breaking that down and make that release ammonia up into the atmosphere if we don’t protect it.
My encouragement to you considering top dressing corn right now, I think we need to break that application in two camps, whether you have the opportunity to apply on your own or not. So, you have a spinner spreader machine or your own spreader where you can get over your own crop in a timely order. Then you have time, and you could apply at your own pace.
Now, for a lot of us who depend on custom application, whether it’s from Sunrise or other vendors across Ohio, there’s a big concern that if we do, if you guys wait till the last minute when a rain is in the forecast and everybody does that, there’s just may not be enough physical time and manpower and equipment to get the application on when you want it.
I would like to encourage you to consider still applying your products right now, because if we don’t, we get in a situation where the corn is going to bolt and either we can’t get over it and make as accurate an application as possible. Because the taller the corn gets, it’s going to essentially interrupt the perfect distribution that’s coming out of the back of a spinner spreader machine.
If that’s not allowing a perfect spread on the width of that machine, then we can encourage some parts of the field that may not get the rate that was prescribed for it. So, keep that in mind. Also with that, you know, if we get wet, we get rain back in the forecast and it stays wet and then the corn keeps growing, we may not get in there in a timely matter and trying to get an airplane to spread urea or a helicopter, or finding someone with a high clearance machine, whether it’s Y-drops dribbling down the center row, that’s never a good day and could be another headache.
So that’s why I bring these points to you, for you to consider on your operation.
Lastly, if you have crop insurance, keep in mind that if you’re protecting your revenue through that investment that you know we’re still going to have a great opportunity for a good crop this year. There’s been very few years in the past minus 1988 was probably one of the worst years if you if you can think back that far. But even in 2012, when we had the most recent really severe drought here in Ohio, we still had corn that yielded, we still had crops that came up and maybe not perform like we want them to, but my point is that there’s very few years where we had a complete failure out there. So, we still want to try to do the best we can for the crop we have out there.
If you have further questions, please reach out to any of us within Sunrise, your ASAs, anybody on the PCT team, including myself we would love to help walk you through your scenario and hopefully help you with some technical advice to address your specific need on your farm.
Take home message is I think we need to keep applying our nitrogen, whether it’s side dress or top dress.
Watch JJ in the Field: Dry Soils and Nitrogen Application. What should I do?
Get a Biological Boost with BioBuildGet a Biological Boost with BioBuild. Our BioBuild® Family of products uses multiple modes of action and bacteria strains to promote plant growth and reduce stress. Beneficial microbes, biologicals and organic acids help plants break dormancy, deal with environmental challenges and ensure sound nutrition throughout the growing season.
BioCape: microbial inoculant plus an enzyme for dry fertilizer impregnation aimed at improving nutrient uptake and microbial soil health.
BioComplete II: a blend of over two dozen various strains of beneficial microbes that enhance plant health and vigor. This product is designed to increase flower production, healthier and more vigorous root systems along with phosphate solubilization and nitrogen fixation.
BioSpray II:a specifically designed bio-stimulant technology containing a beneficial microbial team for producers who do not have in-furrow delivery capability.
C-Green Amino+ II: a seaweed extract fortified with organic acids in combination with N-amino acids + a soil penetrating agent to help any plant mitigate stress.
Digester: a highly concentrated blend of beneficial microorganisms specifically formulated to reduce recent crop residue.
N198 w/MIC Nitrogen Management Aid: a select group of concentrated beneficial microbes with an organic food source applied as a nitrogen management aid coupled with the micronutrients boron, copper, zinc, manganese and molybdenum for enhanced early growth, vigor and to develop a larger root mass in a corn crop.
Nourish 10S: combination of sulfonated humic and fulvic acids.
Soy BioST+R: combines a select group of concentrated beneficial microbes with an organic food source applied as a seed treatment inoculant.
SUN-5: a 5% fulvic acid plant nutritional product.
Biozolve: a blend of over two dozen “beneficial” strains of microorganisms with an affinity for organic solids.
Manure MGR: comprised of over 25 strains of microorganisms that thrive by degrading livestock manure in waste pits and lagoons. It’s 100% natural and safe to use.
BioBuild® products are safe and easy to use. Application timing, rates and restrictions vary with each product. Contact a PCT | Sunrise representative for more information about giving your crops a biological boost with our BioBuild family of products.
Stay Ahead of Weather Stress and Yield Loss With the Right Crop NutrientsFarmers trying to push corn and soybean yields to the max should consider the impact of crop stress and develop a plan to minimize its effects. In the spring, cool, wet weather limits germination, plant stands and can lead to poor nodulation in soybeans. During growth, prolonged periods of heat can lead to moisture loss in the soil causing stress to the crop. In fact, just four consecutive days of hot, dry weather could reduce corn yields by 5-10%.
By the time farmers spot leaf rolling in their corn crop or flipped leaves in their soybeans, it could be too late to reverse the damage.
One way to stay ahead of unpredictable weather and stress is with PCT | Sunrise® BioBuild™ C-Green. C-Green is a rich mix of naturally occurring growth stimulators – including seaweed extract, organic acids and trace minerals – that encourage development of large, vigorous root systems. This helps ensures proper nutrient uptake during early-season growth.
Later in the season, it also benefits crops during critical reproduction stages by promoting lateral branching, flower formation, flower retention and pod development in soybeans. In corn, C-Green stimulates pollen shed, tube formation and while keeping silk tubes viable. Ensuring plants are in peak health during this time can translate to more bushels at harvest.
For best results, C-Green can be used in-furrow as an on-seed starter, 2×2 and/or applied as a foliar during V3-R1 (corn) and V3- R2 (soybeans) at least two weeks prior to a stress event. Since Mother Nature is unpredictable, using it as a preventative provides a low cost “insurance policy” to keep crops healthy and on track for high yield potential.
Learn more about C-Green and how it can work for your operation. Contact our PCT | Sunrise team with questions.
By: Vince Willman, Northern Team Technical Lead
